Excellent chemical compatibility and rugged design for your heating or cooling application.
All wetted parts of fluoropolymer (FEP, PFA or PTFE) construction.
Eliminates stray currents.
PFA coils are available for steam service up to 60 PSI.
10 PSI minimum steam pressure required for operation.
Robust Design
The Coil is designed to eliminate stray currents in tanks and offers excellent chemical compatibility with a rugged design ideal for heating or cooling applications.
All wetted parts are constructed from durable fluoropolymer materials (FEP, PFA, or PTFE), ensuring superior performance and longevity.
The heavy-duty CPVC mounting bracket provides robust support, while standard FEP coils are rated for up to 30 PSI steam service, and PFA coils can handle up to 60 PSI steam pressure.
The coil’s heavy wall tubing improves circulation, reduces pressure drop, and a 1/8-inch perforated guard offers protection from damage.
Integral inlet/outlet connections reduce potential leaks, ensuring reliable operation.
Vacuum breakers are recommended for fluoropolymer heat coil steam heating installations.
Features & Values
All wetted parts of fluoropolymer(FEP,PFA or PTFE) construction with a heavy duty CPVC mounting bracket.
Heavy wall tubing improves circulation and minimizes pressure drop. Larger coils constructed of 1/2 inch(13mm) tubing, smaller coils have 1/4 inch(7mm) tubing.
Integral inlet and outlet manifolds for single point connections greatly reduce the potential for leaks and simplify installation.
Eliminates stray currents in the tank.
FEATURES
- Batch Process Cooling of Process Chemical
- Shell Material: PTFE (Excellent Corrosion Resistance & Thermal Expansion Resistance)
- Flange equipped with PCW In/Out Fitting In One Body
- Heat Transfer Area: 5.5m2 or others
- Configuration: Horizontal
- Dimension: Ø170*1000mm(L)
- Gravity Feed Rate:50L/2.5Min
- Volume: 20 Liter
- Connection: 1” for Chemical, 1” for PCW
Industries
- Semiconductor Fabrication
- Solar Cell Manufacturing
- Flat-Panel Display, LEDs & Electronics
- Chemicals Manufacturing
- Industrial Manufacturing
Other Applications
Electrochemical Deposition
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
| Electrochemical Deposition Products(2) |
| MOTS TRIPLE – VERTICAL
MOTS Triple Vertical: L-shaped, vertical metal over the side heater. 3,000-36,000 watts, 208-600 volts. . 
| 9HS SERIES – TUBULAR
9HS PTFE Heater: Over the side, 9 element, tubular heater. Three phase. 9000-31500 watts, 208-600 volts. 
| V SERIES – VARIPOWER
Metal or Fluoropolymer (PTFE) sheath heater. Single phase. Heats up to 212°F (100°C). 100-1000 watts, 120-240 volts. 
|
| MOTS SINGLE
MOTS Single Heater – Chemical and Small Immersion Heater: Metal over the side single heater. Single or three phase. 1000-12000 watts, 120-600 volts. 
| MOTS SINGLE – DAS, PHOSPHATE
MOTS Single DAS Phosphate Heater – Top Portable Electric Immersion Heaters: Phosphate, metal over the side heater. Single or three phase. 1000-10000 watts, 120-600 volts.
 | MOTS TRIPLE – L SHAPED, DERATED
Derated, low watt density, L-shaped, bottom style metal over the side heater. 1500-18000 watts, 120-480 volts. 
|
